• Home exchange for your maintenance

  • The process involved in troubleshooting a long list of issues with air conditioning units can easily turn into a long and burdensome event. By taking note o a few key components that typically cause issues with these units, you can effectively save yourself a heap of time, hassle of money. In this article, we will outline the keys to DIY home AC repair.

    Step 1 – Start out by simply cleaning out the filters. Filters that are dusty or clogged will only serve to impede airflow throughout the unit. Keep in mind that the hot outdoor condenser has it’s own filters as well. Make sure you inspect each filter in the system, replacing those that are worn out or excessively dirty. Clean filters will immediately work to improve the efficiency of the unit.

    Step 2 – Take a close look at your fans and blowers. If you find that your conditioning blowers are not working, the cooler air will not dissipate. If you find that the problem lies with the outdoor flowers, coolant will not shed heat properly, resulting in the added possibility of the system overheating. The effect of a broken fan or blower is similar to that of a clogged filter.

    Step 3 – Check your pipes and coils for any refrigerant leaks. Leaks that are indoor hold a special priority due to the fact that the coolant fluid has been shown to cause health issues. A quick look will likely show you the source of the leak, however this method is never completely reliable. Leaks should be located by ultraviolet radiation or dye tactics. If you find a leak, you will not want to vent the Freon, because it is illegal. Cases such as these should be addressed by a trained and certified professional. Home exchange for your maintenance

    Step 4 – Take a good look at the unit compressor. These devices take coolant which is low in temperature and has absorbed heat from the air indoors. The coolant will heat up when compressed. Piston issues, motor problems and leaks can prove detrimental to the effectiveness of the compressor. Un-lubricated, dislodged or worn-out crankshafts can also pose an issue. Inspect the valves for signs of warping due to pressure and temperature differences.

    Step 5 – Inspect your AC expansion valve. These devices do the opposite of compressors. Hot, pressurized coolant enters the valve. Once inside, the Freon will cool off and be ready to absorb heat from the air indoors.

    Step 6 – If you make it through this list and are still noticing issues with your unit, it may be time to place a call into the professionals. A certified AC repair specialist will be able to pinpoint your issue and offer you options to ensure that it is addressed properly. Though it may cost you a few dollars, there is a certain comfort that comes along with knowing that your AC repair is in professional hands. In cases such as these, the extra cash may be very well worth the quick relief.
  •  No Page 
    Please log in to make comments

    200 Characters left
  • ABOUT THE AUTHOR

    When DIY isn't enough to ensure AC repair Mcallen TX residents can call upon one of any number of qualified local repairpeople. Learn more here: http://www.airboytx.com/.
Home Register My Article Published Articles Terms and Conditions Contact Us
Copyright © 2014, All rights reserved. 0